The product has been added to your cart   Go to cart

The product has been added to your wishlist   Go to your wishlist

Double POWER CAM camshaft

for YAMAHA T MAX 500 ie 4T LC 2008->2011

5913783

€ 963.80
-17.2%
€ 798.03

The product has LOW AVAILABILITY.
NOTE: ONLY for Malossi CYLINDERS Ø 70 OR Malossi PAIR of PISTONS Ø 66 for Original cylinder (3413706)

Description

Super T-Max

Malossi is proud to offer "Super T-Max," a completely new gamma of products for the most popular Yamaha Maxi-Scooter and like always "Made In Italy"!

 

Double Power Cams

Camshafts are the most critical timing component in a 4-Cycle engine.

The camshafts, in fact, are assigned the tasks of controlling the air/fuel mixture in the combustion chamber by opening and closing the intake valves and also evacuating the exhaust gases by opening and closing the exhaust valves.

Malossi's Double Power Cams are fine-tuned to generate an optimum and progressive power increase if matched with original cylinder or an exponential increase in power if matched with Malossi's 560 cc big bore twin cylinder set.

Malossi has thought of both carburetted and electronic fuel injected scooters.

In fact, first and second series, if equipped with Malossi's Double Power Cams, can produce noticeable power increases.

Malossi's Double Power Cams result from long and meticulous engine testing with our in-house dyno.

The manufacturing process was achieved by our engineering department's scrupulous requirements, starting with the material selection to the high precision machining to the heat and chemical treating and finally to quality inspection and assembly.

Malossi S.p.A, always providing the highest quality service.

 

Specifications

  • Exhaust valve camshaft
  • Intake valve camshaft

Made of high alloy steel, casehardened, gas nitride, and ground with redesigned, high lift and re-profiled lobes.

 

Product reserved exclusively for competitive use in areas designated for competitions, according to regulations stipulated by the relevant sporting authority. We do not accept any liability for improper use.

Makes and Models

Double POWER CAM camshaft

Make Model
YAMAHA YAMAHA T MAX 500 ie 4T LC 2004->2007
ONLY for Malossi CYLINDERS Ø 70 OR Malossi PAIR of PISTONS Ø 66 for Original cylinder (3413706)
YAMAHA YAMAHA T MAX 500 ie 4T LC 2008->2011
ONLY for Malossi CYLINDERS Ø 70 OR Malossi PAIR of PISTONS Ø 66 for Original cylinder (3413706)
YAMAHA YAMAHA T MAX (carb.) 500 4T LC 2001->2003